Alinco has created a new UHF FM Hand held Transceiver that sets new standards in features, convenience and easy operation packed in a compact pager-size package. The DJ-S40T has an ergonomic design that's "user friendly" and capable of 1 watt output with optional Ni-MH battery pack. You'll be ready to travel the world with CTCSS encode/decode and European tone bursts, all included at no extra cost.

STANDARD FEATURES

• SMA rubber-duck antenna port
• 500mW output with standard dry cell case, 1W with external DC supply
• 38 CTCSS encode/decode tones and 4 European Tone Burst settings
• 13.8 VDC direct input and external Mic/Speaker ports
• S-meter
• Cable Cloning
• 100 memory channels + 1 Call Channel
• MARS capability
• VFO, Memory and Tone Scan with skip, busy, and timed mode
• Busy-Channel-Lock-Out and Time-Out-Timer
• External device control feature (outputs 3Vdc 5mA signal from an accessory port when squelch opens)
• Additional features, including anti-theft alarm and experimental mosquito repelling tone!

SPECIFICATIONS
General
Freq. RX default:	410 to 470MHz
Freq. TX:	430.00 to 449.995 MHz
Freq. Stability:	+/- 5 ppm
Antenna Imp.:	50 ohm unbalanced
Supply Voltage:	DC 13.8V rated / DC 4.5 min to 16.0V max
Ground:	Negative GND.
Current consumption:	TX 1W 600mA approx. at 13.8V external source
	RX squelched stand-by 50mA approx.
	RX Battery saver ON 20mA approx.
Operating Temp. range:	-10 to +60 degrees C. (14 to 140 F)
Dimension w/o projection:	56(W) x 102(H) x 30 (D)mm with dry cell case (2.2" x 4.0" X 1.2" inches)
Weight with empty dry cell case:	Approx. 100g (3.5oz)
Transmitter
Output power:	1W at 13.8V or with EBP-53N battery-pack, 0.5W with dry cell case, Low=0.2W
Modulation:	Variable reactance FM
Max. Deviation:	+/- 5kHz
Spurious emission:	less than -60db
Microphone Imp.:	2k ohms approx.
Receiver
Circuit:	Double superheterodyne
1st IF freq.:	21.7Mhz
2nd IF freq.:	450khz
Sensitivity:	12db SINAD better than 14dBu (0.25uV or better)
Selectivity:	More than 6dB/6kHz, Less than -60dB/14kHz
Audio output power:	200mW (8ohm 10%THD)
Audio impedance:	8 ohms